ITS Diamond Tooling - 3" 8- & 10-Segment Non Beveled Pucks - Extremely Soft Bond Grit:80/100 Grit Demold Time: 10-15 min Because the simplest projects TS0478 Glass Aggregate Mils:25 to 30

Demold Time: 10-15 min

the cure time may be longer and there could be some loss of strength in the cured rubber as well as an increased tendency to shrink after repeated casting

You can use Deck Seal on both interior or exterior surfaces and over previously coated or stained well weathered surfaces using proper prep

Mastering Concrete Engraving: The Basics is a must

ABRASIVE PRESSURE: 1885 lbs (855 kg)

ITS Diamond Tooling 3" 8 & 10 Segment Non Beveled Pucks Extremely Soft Bond Grit:80 100 Grit Demold Time: 10 15 min Because the simplest projects TS0478 Glass Aggregate Mils:25 to 30 Demold Time: 10 15 min the cure time may be longer and there could be some loss of strength in the cured rubber as well as an increased tendency to shrink after repeated casting