CMT 835.001.11 Rabbeting Set 1-3/8" x 1/2" H=0 to 1/2" S=1/4" Top-Flange Hangers Number of Knife Sides 4

Number of Knife Sides 4 (rotate for each new edge)

and engineered wood product sizes

nails or (8) #10 x 1-1/2 Strong-Drive SD Connector screws (Model: SD10112)

Using the straps in pairs represents the strongest configuration and is required for load-rated performance

Finish: Hot-Dip Galvanized

CMT 835.001.11 Rabbeting Set 1-3/8" x 1/2" H=0 to 1/2" S=1/4" Top-Flange Hangers Number of Knife Sides 4The CMT 835. 001. 11 is a Rabbeting Bit. Rabbeting bits cut rebates (rabbets) along board edges for joinery, cabinet backs, and door frames. Interchangeable bearing set adjusts the rabbet depth. SET INCLUDES Rabbeting Bit (835. 001. 11) 5 Interchangeable Bearings for depths 0" to 1 2" SPECIFICATIONS Diameter (D) 1 3 8" Cutting Depth (H) 12. 70mm Cutting Height (I) 1 2" Total Length (L) 2 5 16" Shank (S) 1 4" Number of Teeth 2 Product Type Rabbeting